TTS2 - 10W laser machine

TTS2 - 10W Specifications

Material reference (English)

For engraving

MATERIAL SPEED(MM/MIN) POWER TIMES
PLYWOOD 6000 50 1
ACRYLIC 6000 20 1
LEATHER 6000 20 1
ELECTROPLATED COATING 1000 100 1
POWDER COATING 6000 50 1
ANODIC ALUMINA 6000 20 1
STAINLESS STEEL 3000 100 1
DENSITY BOARD 6000 60 1
PEDDLE 6000 100 1
PLASTIC BOARD 6000 40 1
CARDBOARD 6000 50 1

 

For Cutting

MATERIAL SPEED(MM/MIN) POWER (%) TIMES
PLYWOOD 1MM 600 100 1
PLYWOOD 2MM 450 100 1
PLYWOOD 3MM 280 100 1
PLYWOOD 4MM 200 100 1
PLYWOOD 5MM 150 100 1
PLYWOOD 6MM 100 100 1
PLYWOOD 7-8MM 100 100 1~2
ACRYLIC 1MM 500 100 1
ACRYLIC 3MM 200 100 1
ACRYLIC 6MM 100 100 1~2

Note: 

The energy value is set to 500, and the laser intensity accounts for 50% of the power.

The energy value is set to 1000, and the proportion of laser intensity to power is 100%. The larger the energy, the faster the speed can be set.

The above parameters are only for reference. Due to the different properties of the materials. Please adjust the parameter values according to the actual situations.